Water Ejection Tool
Remove water and dust from your device speakers instantly using advanced sound frequencies
Play This to Test Your Speaker
How to Use the Tool?
Wipe Your Device
If any water droplets are visible on your device, remove them using any dry cloth. By doing so you can prevent your speakers from moisture.
Increase Volume
After cleaning your device, turn your device’s volume to the maximum level.
Place Device
To make the tool work properly, place your device on a flat surface to work it.
Start Cleaning
Click on the start button in the app to start the tool and wait for the progress of the given line bar to 100%.
Switch to Vibration Mode
Now, select the vibration mode and press the water button. Again, wait for the bar to progress 100%. This will remove the remaining water particles.
Check Performance
After these steps, check your mobile sound by playing audio or music to check your speakers. You will notice the huge improvements.
Repeat if Needed
If your device’s sound is still muffled, repeat the procedure 2 to 3 times for better results..
What is Fix My Speaker?
Has it ever happened to you that you experienced a muffled sound coming from your phone’s speaker after you dropped your phone in the water? I know this is one of the most drastic feelings to get your phone wet in your sink, toilet, or bathtub.
Don’t worry; I came here with a solution to this problem. All you have to do is run the Fix My Speaker web app on your phone in full voice to eject all the water from your phone’s speaker. It produces sound waves of high frequency (180Hz) that mimic Apple water ejection features, efficiently expelling water and dust from your phone’s speaker.
How Does It Work?
The work of fix my speaker is very simple. All you have to do is tap on the water eject button, and a bass sound is produced, mirroring the same sound used in the Apple water ejection feature. The high-frequency sound waves effectively remove water from your phone speaker. Not only water but it also helps in removing excessive dust and debris from your speaker with a straightforward button click.
What not to do to clean a water-damaged phone?
1: Do not use a hair dryer to remove water or dust from your phone’s speaker. It will cause more harm to the speakers by damaging the sensitive components of your phone.
2: Don’t turn on your phone if it is wet because it can cause a short circuit.
3: The rice drying method is used by many people to clean the speakers, but it can harm the phone as rice particles can enter inside the mic, charging port, or speakers.
4: Don’t charge your phone until it is fully dry because it can also lead to permanent battery damage
What to do If the Phone gets Into the Water?
elow are some important steps to be taken immediately after accidentally getting your phone wet. Follow these steps accordingly to avoid permanent water damage.
Switch Off
Turn off your phone right away to prevent any electrical mishaps.
Dry Exterior
Use a soft cloth to gently pat the exterior dry.
Extract Cards
Remove the SIM and SD cards promptly to halt any further damage.
Shake Off
Give the phone a gentle shake to rid it of excess water.
Exercise Patience
Be patient during the drying period to avoid irreversible damage.
Backup Data
If the phone powers on but shows issues, immediately back up crucial data.
Test Functionality
Ensure the phone works properly before reinserting SIM and SD cards.
Review Insurance
Check with your insurer about coverage for water damage
Waterproof Protection
Think about using a waterproof case for future protection during outdoor activities.